Painters Guide How To Repaint Your Home

0
460

Fed up looking at the same colors and texture of the walls? Or is there any special occasion around the corner and you want to make the house look new and fresh?  

Well, whatever the reason is, if you are thinking about repainting your home, you have landed just at the right place. Here we will provide you detailed information as for how to repaint your home. The important tips and tricks will help manifolds in getting the best result. So continue reading and hush the curiosity.

The procedure for painting and repainting the walls are somewhat different. The existing paint eases the preparation of base or surface which in turn decreases the cost of the entire project.

Source

Check out the steps according to the renowned website paintsprayerguy.com to follow while repainting the home.

  1. Prepare The Area

The first step should be making your space ready-to-paint. We are not talking only about the walls, but the furniture and other appliances present in the room as well. Make sure you have emptied the room so that other things do not get the color due to spills while painting.

Protect the floor by covering it with old newspapers, unused clothes or large canvas sheets. Things which are immovable should be adequately covered so that they do not get the colors and become dirty due to paint splatter.

  1. Say Goodbye To The Old Paint

No matter how alluring it may seem, you should never paint over the flaking old coating. Therefore, the next step is to remove the old paint from the walls to get a clear surface beneath. Although the removal of old paint is a daunting task, do it for the sake of getting the best result. It is always better to perform the task once and with perfection rather than getting a poor outcome and doing it again.

Use a scraper to get rid of the peeling paint. It will not only ease the repainting work but also ensures getting a smooth coating all over again.

  1. Bid Farewell To The Cracks And Holes

Smooth and flawless paint is the result of a smooth and flawless wall. Yes, you heard me right. If the surface is smooth no one can stop you from getting the best repaint work. So, once you are done with scrapping the flakes of the walls, the next step should be filling the cracks and holes. You can find fillers and filling knife or scrapers in the market that assist in patching up the noticeable cracks and holes.

Even-up the entire area by sanding before applying the new paint.

  1. Time To Clean The Walls

Once you are done with filling the voids, the next step should be making the wall free from filth and dirt. You may use the vacuum cleaner to remove every speck of dirt or wipe the walls with a damp cloth. You can also use detergent to overcome sticky dirt and grease from the surface. Ensure you get a clear wall before applying the paint. It will make the work easy and give the best result.   

  1. Primer For The Darker Wall

If you are thinking to give a lighter color to your previously dark wall, use a primer beforehand. In general, you need to apply multiple layers of paint over the dark wall to make it look the way you want. However, if you are using a primer, it will help to retain the colors perfectly. Moreover, the primer will be cost-effective as compared to using paints multiple times. If the previous color of the wall is visible even after the application of primer, apply another coat of primer for enhancing the effectiveness.  

  1. Let It Dry

Generally, it is advised to paint two coats for getting the best result. At the same time, it is recommended to let one coating get dried completely before applying the second one. The color does not retain well if the coating is not thoroughly dried. In general, a gap of two hours is considered perfect between the applications of two coatings.

Wrapping Up:

So these are the small steps which could make a big difference in getting the new look of your home. Follow them and let the new walls say hello!